Description

Keep O-rings moving and sealing smoothly.
MOLYKOTE® 111 Compound is a silicone grease for lubricating rubber and plastic O-rings, gaskets and seals. A thin, even layer helps the seal slide into position during assembly and provides water-resistant lubrication at the sealing interface.
A practical grease for watertight hardware.
Use it on compatible O-rings around underwater robot enclosures, cable penetrators and connector seals. The manufacturer also lists control and pressure plug valves, vacuum and pressure systems, outdoor and shipboard equipment, electrical service entrances and enclosure gaskets among its applications.
The compound offers excellent water resistance, low vapor pressure and low volatility. Compatibility should be checked against the actual elastomer, plastic and operating environment. The grease supports a properly designed seal; it does not give an assembly a depth or pressure rating by itself.
Use at the sealing interface.
Enclosure O-rings
Lightly lubricate face and radial seals so they seat without pinching or dragging.
Penetrators and bulkheads
Apply a thin film to compatible O-rings before installing the fitting in its prepared groove.
Valves and gaskets
Lubricate suitable valve seals and gaskets exposed to water washout or outdoor service.
Compound and package data.
| Product | MOLYKOTE® 111 Compound |
|---|---|
| Composition | Silicone oil; inorganic thickener |
| Appearance | White to light gray; translucent |
| Compound service range | −40 to 204 °C |
| Key properties | Water resistant; low vapor pressure and volatility |
| Sale unit | 150 g resealable tube |
Temperature range is for the compound, not the assembled enclosure or O-ring. Manufacturer typical values are guidance rather than an assembly rating.
Clean, coat and inspect.
Inspect
Check the O-ring and groove for cuts, debris and damage.
Lubricate
Apply a thin, even film to the seal and mating surface.
Verify
Seat the seal correctly, assemble and test the finished enclosure.
For connector contacts or specialized elastomers, follow the connector or seal manufacturer’s instructions.
Included in the package.
MOLYKOTE® 111 silicone grease
- 150 g resealable tube1
Illustrative package visual; printed packaging may vary by batch.





