Skip to content
AQUROV Underwater Robotics Components
Distributor Program
Cart (0)

Your cart

Your cart is empty. Standard components are ordered straight from the catalogue, which is organised by what the part has to do inside a build.

Shop components
Checkout View cart
Shop Components

Menu

Shop Components

Application

Offshore Inspection

Offshore inspection puts a small ROV on structures people cannot reach — platform legs, moorings, risers and subsea hardware — to bring back a repeatable look at a known location. The recommendation follows a working inspection pattern: an inspection platform, the camera and lighting that still produce an image in poor visibility, and the enclosures and connections that survive repeated wet deployment.

  • 0 components Filed under this application
  • 5 component families Recommended for this environment

Working environment

Exposed offshore sites as well as sheltered harbours, with current, swell and often low visibility. Deployment windows are short and shared with other operations; the vehicle is launched from a vessel or a structure and flown along a planned line of inspection.

Technical challenges

Holding position and heading in current while the camera stays pointed at the target, and producing an image a defect can actually be seen in when the water is turbid. Depth, pressure and corrosion protection have to hold over repeated dives, and the tether has to tolerate abrasion against structure.

Key selection factors

What decides the specification in this environment.

  • Station keeping Thrust authority relative to vehicle size decides how well the vehicle holds position and heading while the pilot works.
  • Imaging in poor visibility Camera low-light performance and tightly controlled lighting decide whether the footage is usable in turbid water.
  • Depth rating and sealing Rate enclosures, penetrators and connectors for the inspection depth, then confirm the sealing routine the crew will actually follow on deck.
  • Deployment speed Components that assemble and service quickly keep the inspection inside a short weather window.

Recommended component families

Families that suit this environment; open one to compare the parts inside it.

Offshore Inspection

Tell us where the system has to work.

Depth, water conditions, task, repeat rate and the crew operating it decide more about the specification than the headline requirement does. Describe the job and we will map it to components that survive it.

Describe your application All applications