Skip to content

Global direct purchasing · Components, systems and technical resources

Your cart

Your cart is empty. Standard components are ordered straight from the catalogue, which is organised by what the part has to do inside a build.

Shop components
Checkout View cart
Shop Components

200 g Lead Ballast Weight for ROV

$7.90

Fine-tune your ROV’s buoyancy and trim with a compact 200 g coated lead ballast block. M6 mounting lets you adjust weight placement on the lower frame.

Technical Downloads Request a document

Description

Two black coated 200 g lead ballast weights with central hexagonal mounting recess

ROV buoyancy and trim

Put weight where your ROV needs it.

A compact, coated lead ballast block for adjusting the balance and buoyancy of an underwater robot. Mount individual 200 g weights at the lower frame and change their number and position to suit your vehicle. It also serves as ballast for marine equipment and other suitable devices.

  • 200 gNominal weight per block
  • M6Mounting interface
  • LeadCoated cast body

Product details

Small blocks. Precise placement.

The rounded rectangular form sits close to the frame. A central mounting hole and hexagonal recess support M6 fastening, while the black coated surface covers the cast lead body.

Adjustable layout

Move weights along available frame mounting positions to tune pitch, roll and total ballast.

Lower-frame placement

Position ballast low on the ROV to help establish a stable trim with buoyancy material above.

Close view of one coated lead ballast block and its hexagonal M6 mounting recess
Actual product detail

Technical details

Specifications

Product type ROV ballast weight
Nominal weight 200 g per block
Core material Cast lead
Surface Black coated finish
Mounting Central M6 interface with hexagonal recess
Overall dimensions 50 × 35 × 12.90 mm
Reference product code YS-FC-004

Dimension drawing

Check the frame interface

The supplied drawing shows the front, side, lower profile and isometric views, including the central mounting recess. Dimension callouts are preserved from the original.

Original dimension drawing of the 200 g ROV ballast weight, showing 50 mm length, 35 mm width, 12.90 mm thickness, R10 corners, 6.50 mm hole and other source callouts
All dimensions in mm · original drawing

Frame installation

Place ballast on the lower frame

The original ROV assembly view shows separate blocks mounted underneath the slotted frame. Use the available mounting positions to distribute weight around the vehicle.

Original ROV assembly illustration showing ballast blocks and M6 fasteners positioned beneath the slotted frame
Original assembly illustration · mounting layout reference

Buoyancy adjustment

Tune the complete vehicle in water

The number of weights depends on the enclosure, battery, payload and buoyancy foam used in your build. Recheck the balance whenever the equipment configuration changes.

Start with a complete build

Fit the battery, tools, foam and other mission equipment before testing trim.

Adjust count and position

Add, remove or reposition the blocks on the lower frame to correct balance.

Test in water

Verify the final buoyancy and attitude with the actual vehicle configuration.

Before ordering

Handling and order notes

Lead handling. Lead is harmful to human health. If the coating is damaged, handle the weight carefully. After direct contact with the lead surface, wash the affected skin with clean water.

Surface appearance. Minor scratches or handling marks on the surface are normal for this product. Please review this characteristic before ordering.

Shipping weight. Shipping charges are based on actual shipment weight. If an order exceeds the estimated weight, our team will confirm any adjustment before dispatch.

Common questions

FAQ

What is the block made of?

It has a cast lead body with a black coated surface.

How many blocks should I use?

It depends on the ROV’s total mass, buoyancy and payload. Adjust the number and placement during an in-water trim test.

Does the 200 g figure mean underwater ballast?

It is the nominal weight of one block. The effective submerged weight has not been specified for this item.

Buying this part in quantity, or in a changed form

The store price covers single units and small quantities. Larger quantities, changes to the standard part and systems that have to be checked are handled case by case.

Not certain it fits?

Send the part number and the system it goes into.

Depth, voltage, thrust, interface and the surrounding parts are enough for us to tell you whether this product fits, what it needs to run, and what to watch for during integration.