In this article, we will introduce how to do the initial setting for brushless ESC within 3 steps.
- Connecting the power supply, hear the “beep, beep, beep”three-tone. which Indicates that the power on is normal.
- Turn the highest speed signal at 2ms or 1ms, and you will hear a “beep”.
- Turn the speed signal to 1.5ms, the signal is stopped, and a “beep”.
When the initiation is completed, you can normally control your speed.
Besides, there are some small tips you need to get.
- PWM signal control is 50HZ.
- The control range of PWM is 1ms -2ms.
- 1ms-1.5ms and 1.5ms- 2ms are reverse steering.
- 1.5ms is a median stop.